Installation is easier obviously by adjusting the levelers. Production is cheaper because materials cut produce more pieces. Use cabinet levelers? Why? For those reasons: |
Advantages using Cabinet levelers
|
E-mail: [email protected]
Telephone: + 1 450 372 0555 Fax: + 1 450 372 7978 |
SAVING FACTORS:
LABOUR |
APPROXIMATELY 2/3 OF THE COST OF A KITCHEN IS LABOUR. THE USE OF CABINET LEVELERS WILL CUT DOWN ON LABOUR DOLLARS PER UNIT. |
Cuts: | Fewer cuts
=> Less time
Fewer cuts =>Fewer errors => Less time |
||
Assembly: | The sides
of the cabinet not being pre-defined for front, back, top or bottom makes
mounting easier. Less machines fewer inventories.
Easy assembly =>Less time Easy assembly =>Fewer errors => Less time |
||
Installation: | Leveling
cabinets is an easy operation giving a superior quality.
Easier installation => Less time |
||
Appearance: | The cabinets
are all perfectly straight.
The insides of cabinets are not cluttered with screws connecting cabinets together. The kick plate is independent, making for easier and straighter installation, which should improve its appearance. |
||
Functionality: | The use
of revelers makes any plumbing or ventilation system easier to install
and more accessible.
If there's ever any water spill the cabinets are not damaged. The kick plate is removable, it is easier to access underneath the cabinet for cleaning, etc. |
||
Comparing with the traditional way to build cabinets: |
|
Comparing standard method to build cabinets
with the traditional way and with levelers
The why of choosing cabinet levelers |
||
Traditional Way:
Primary cuts: 4 Secondary cuts: 10 Number of pieces: 5 Net loss: 15" x 44" |
||
With Cabinet Levelers
Primary cuts: 3 Secondary cuts: 0 Number of pieces: 6 Net loss: 0 Advantages: More pieces per panel No loss Less cuts No predefined sides Standard cuts Blades stay sharper longer |
Right now, we are presenting 12 different models to fulfill the needs
of any manufacturer. Nevertheless, if it is requested, We can study any
modification for this product such as changing the color or material used
to manufacture these cabinet levelers.
|
|
||||||||||
The most popular cabinet leveler in the group. Extremely easy to install. At the beginning the regulation of this model was done from the top by a screwdriver. Many installers and manufacturers complained about the difficulty of regulating it with a screw driver when located near a wall. U.E.R. solved the problem fixing the 1002 making a 12mm hole. To regulate it can be done manually or with a key of 27mm. The end is a little bit round which allows better movement when it is regulated. Extendible from 13 to 20 cm. Weight Capacity 250 kg. | Basically the same system than 1002.
In this case the base is 40 mm. This allows an easy regulation by hand.
Or with a key of 40mm. The end is a little bit round which allows better
movement when it is regulated. Fixed to the cabinet by a hole of 12mm it
is very easy to install. Extendible from 13 to 20 cm.
Weight Capacity by unit 250 kg. |
||||||||||
|
|
||||||||||
1000 is it very similar to the 1002
cabinet leveler, the difference is that 1000 is shorter. In fact it is
the continuity of the model 1002. With the two models we cover all the
needs of a cabinet leveler for any manufacturer ( from 9 to 20 cm of height)
without adding any extra part that can weaken the resistance of the cabinet
leveler.
Extendible from 8 to 13 cm. Weight Capacity 250 kg. |
1004 is it very similar to the1006
cabinet leveler, the difference is that 1004 is shorter. In fact it is
the continuity of the model 1006
Extendible from 8 to 13 cm. Weight Capacity 250 kg. each |
|
|
|||||||||||||||||||||||||||||
The 1010 and the 1008 cabinet leveler.
Knock-in 10mm can be glued or pressed into the conglomerate. 4 screwing
points to hold the head. The body is detachable. One screw can hold the
body. The base is 17mm across.
The end of the base is a little bit round which allows better movement when it is regulated. Extendible from 13 to 20 cm. Weight Capacity by unit 250 kg. |
The 1014 and the 1012 are most
sophisticated cabinet leveler.
Knock-in 10mm can be glued or pressed into the conglomerate. 4 screwing points to hold the head. The body is detachable. One screw can hold the body. The base is 40mm across. The end of the base is a little bit round which allows better movement when it is regulated. Extendible from 13 to 20 cm. Weight Capacity by unit 250 kg. |
|||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||
1008 cabinet leveler.
Knock-in 10mm can be glued or pressed into the conglomerate. 4 screwing points to hold the head. The body is detachable. One screw can hold the body. The base is 17mm across. The end of the base is a little bit round which allows better movement when it is regulated. Extendible from 8 to 13 cm. Weight Capacity by unit 250 kg. |
The body is detachable. One screw
can hold the body. The base is 40mm across.
The end of the base is a little bit round which allows better movement when it is regulated Extendible from 8 to 13 cm. Weight Capacity by unit 250 kg. |
|
|
|||||||||||||||
Similar to the cabinet leveler 1026.
In this case the 12mm Knock-in is expandable by pressuring the other end.
A plastic piece moves into the knock and expands the wall making enough
pressure to hold all the cabinet leveler. 4 screwing points to hold the
head. The body is detachable. One screw can hold the body. The base is
17mm across.
The end of the base is a little bit round which allows better movement when it is regulated. Extendible from 13 to 20 cm. Weight Capacity by unit 250 kg. |
||||||||||||||||
No need of drill the cabinet, 4 screwing hold the head. The body is detachable. The base is 40 mm across. The end of the base is a little bit round which allows better movement when it is regulated. Extendible from 13 to 20 cm. Weight Capacity by unit 250 kg. |
Support A (1016) is made to
hold a cover for the cabinet or to hold the cabinet leveler to the wall
Support B (1018) is made to hold a cover for the cabinet or to hold the cabinet leveler to the wall. It has an extra 10mm to it doesn’t touch the head of the cabinet leveler. |
|||||||||||||||
Support C ( 1020) was created to hold support A for applications that require some leeway. Support C gives a 25 mm leeway. |
Our goal with this product is to provide the useful cabinet leveler at the best possible price. Knowing that this product:
We are offering a full set with three different sizes. Shoe caddy is
hardware to build small drawers to store shoes. The complete set of hardware
only needs two screws and you favorite wood to build a very nice and practical
drawer for shoes. It is an excellent accessory for winter shoes when no
one want salty water everywhere!
|